Bering-uClibc 7.x - User Guide

From bering-uClibc
Revision as of 14:05, 10 October 2021 by Kapeka (Talk | contribs) (WARNING: Work in progress, this doc. is not complete yet)

Jump to: navigation, search

WARNING: Work in progress, this doc. is not complete yet

But most of LEAF new features have been added and documented:
- new simpler USB boot distribution
- new simple web browser login on the internal interface eth1 using admin:admin
- Raspberry PIs distribution and installation
The uncompleted sections, in red, can all be found in the earlier 6.0 and 5.0 doc..., they have not been checked and moved here yet, but should still work fine for the current distribution, just be careful.
Please send your comments, corrections or suggestions to https://sourceforge.net/p/leaf/mailman/leaf-user/ , you will have to subscribe to this list first https://sourceforge.net/projects/leaf/lists/leaf-user .

This is the "Table of Contents" page for the Bering-uClibc 7.x - User Guide.

This guide provides information for Installers, Administrators and general Users of Bering-uClibc 7.x.

Click on one of the links below to access the relevant Chapter or Sub-Chapter. Then, use the Next and Prev links to move from Chapter to Chapter, or click a Bering-uClibc 7.x - User Guide link (at the top of each Chapter or Sub-Chapter page) to return here.


Chapters

  1. Introduction
  2. Hardware Requirements
  3. Installing the Disk Image
  4. Basic Configuration
  5. IPv4 Networking
  6. IPv6 Networking
  7. Advanced Topics
  8. Upgrade LEAF Bering-uClibc

Appendices

  1. Upgrading from Bering-uClibc 6.x
  2. Overview of the Startup Sequence
  3. Hardware-Specific Guides
  4. Working with Disk Image Files
  5. Troubleshooting/FAQ