Revision as of 20:59, 2 January 2021

WARNING: Work in progress, this doc. is not complete yet

This is the "Table of Contents" page for the Bering-uClibc 7.x - User Guide.

This guide provides information for Installers, Administrators and general Users of Bering-uClibc 7.x.

Click on one of the links below to access the relevant Chapter or Sub-Chapter. Then, use the Next and Prev links to move from Chapter to Chapter, or click a Bering-uClibc 7.x - User Guide link (at the top of each Chapter or Sub-Chapter page) to return here.

Chapters

1. Introduction
2. Installing the Disk Image
3. Basic Configuration
   • Booting for the First Time
   • Basic System Configuration
   • LEAF Packages
   • Log Files
   • Email Alerts
   • Setup a small timeserver
   • Using dropbear - a small SSH replacement
4. IPv4 Networking
   • External Network Connections
   • Internal Network Connections
   • Configure Shorewall
   • Configure Traffic Management
   • Configure Dnsmasq
   • Configure 802.1Q VLANs
5. IPv6 Networking
   • External Network Connections
   • Configure Shorewall6
   • Configure Router Advertisements
   • Configure DHCPv6
6. Advanced Topics
   • Setting Up a Client for Dynamic DNS with ezipupd
   • Setting Up a Client for Dynamic DNS with ddclient
   • Setting Up a Wireless Access Point
   • Setting Up a Wireless Internet Connection
   • Setting Up a Virtual Private Network (VPN)
   • Setting Up a Routing Daemon
   • Setting Up a Print Server
   • Setting Up a VOIP Server
   • Setting Up a File Server
   • Setting Up a RADIUS Server
   • Setting Up a Bridge
   • Setting Up a Network Emulator
   • Setting Up Zeroconf Networking
   • Setting Up Universal Plug and Play (UPnP)
   • Setting Up Tor
   • Setting Up Remote Monitoring
   • Setting Up Backup to Remote Server
   • Setting Up a HTTP Anti Virus Proxy
   • Setting Up a Home Automation controller with heyu
   • Setting Up a DHCP server with a configuration stored in openLDAP
   • Setting Up Ad blocking with dnsmasq
   • Setting Up SSH password-less login and Port Knocking
   • Setting Up a Raspberry PI as a net to serial gateway
   • Unpacking a gpg signed lrp package
7. Upgrade LEAF Bering-uClibc

Appendices

1. Upgrading from Bering-uClibc 6.x
2. Overview of the Startup Sequence
3. Hardware-Specific Guides
4. Working with Disk Image Files
5. Troubleshooting/FAQ