Bering-uClibc 4.x - User Guide - Basic Configuration - Booting for the First Time
From bering-uClibc
Basic Configuration - Booting for the First Time | ||
---|---|---|
Bering-uClibc 4.x - User Guide | Next |
Install Media and Boot
Insert the prepared boot media into the system which is to run Bering-uClibc 4.x and power it on.
Successful First Boot
If everything works properly you should see lots of diagnostic output followed by a login prompt similar to the following:
LEAF Bering-uClibc 4.0.0 Rev 9 uClibc 0.9.30.3 firewall tty1 firewall login:
Login as user "root" (no password required at this point). You will be prompted to set a password for the root account (twice). You will then be presented with the LEAF configuration menu:
LEAF configuration menu 1) Network configuration 2) System configuration 3) Packages configuration s) Save configuration m) Backup modules f) Find & load modules for hardware c) Show configuration changes since last save d) Show configuration changes from defaults h) Help q) quit ---------------------------------------------------------------------------- Selection:
Troubleshooting
TODO Add a summary of the likely error conditions and solutions.
Up | Next |