Bering-uClibc 6.x - User Guide - Advanced Topics - Setting Up SSH password-less login and Port Knocking

From bering-uClibc
Revision as of 20:08, 3 September 2018 by Jeanrocco (Talk | contribs)

Jump to: navigation, search
Setting Up SSH password-less login and Port Knocking
Prev Bering-uClibc 6.x - User Guide Next

SSH password-less login

SSH (dropbear) allows password-less login by using RSA security key pairs. To set it up you will have to generate the RSA key pairs on your client machine (PuTTYgen on Windows, ssh-keygen OSX & Linux) and copy the public key in your router file /root/.ssh/authorized_keys. If you have more than one client machine, repeat the same process on each of them, and append their respective public keys in your router file /root/.ssh/authorized_keys. On Linux or OSX you can use the ssh-copy-id utility script that might help you do that.

Make sure you have this format:

firewall# pwd
/root/.ssh
firewall# cat authorized_keys
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDtKYa9MqShtRkJDa....
...
...
ICxqcbjMXktnN3cygsf3cIU+f/SJ9r7 mywife@macbookpro.private.network
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCrpgezG0X9RhuDBBQ...
...
... 
l7bUlGYoouP3tpqfXxIBbQEeMr/2X99 me@ProBook-6560b
firewall#

You can now very securely login in your firewall without a password from those client machines obviously. You could disable password login, it would be even safer, but be careful not to lock yourself out... If you do lock yourself out, you will have to connect through the console port to fix things up. If you still have/want/prefer to use a password anyways, use a very very very strong one, you never know when you might have to login from none of your prepared client machines. Keep in mind though, that with passwords, it's just a matter of time to get cracked. Finally, you can always keep, at your own risks, a copy of one of the private keys on a portable secure medium..., phone, earrings ...


If you intend to login from the internet, you have to add the following rule to /etc/shorewall/rules

SSH(ACCEPT) net fw

By default, SSH listens on opened port 22, but nothing prevents you from choosing another port like, say 65022, for SSH to listen to. The "port scanners" wont usually reach there. There are ongoing debates about the questionable security of this obfuscation... Anyway, if you do, add this rule then:

ACCEPT  net fw tcp 65022

and tell dropbear to listen on port 65022...

lrcfg -> 3) -> 13) -> 1)
#DB_PORT=22
DB_PORT=65022

and use the following command to connect:

ssh -p 65022 root@your.ipaddrs.router


Port Knocking

Port knocking consists in sending a sequence of random port connection attempts to a router on normally closed ports, using TCP or UDP packets. When the port knocking software on the router detects a predefined combination sequence, it will then open up a specific port for a certain amount of time, thus giving you time enough to make a connection attempt on that port.

The most interesting security gain of the "Port Knocking" technique is that it will allow you to hide (close) all your router's ports from the internet, specially this SSH port. Considering that "scanner attackers" would be looking for open or exploitable ports on a typical clueless server, they might not try to dig deeper if they find no opened port on your router, and presumably would go look for another more tempting victim . But if you are a person/site of interest, they might still persist though, and port knocking can only slowed them down, since they will have to try knocking on every ports, while looking if it opens up an ssh port. Knocking on one port only is not too hard to find, but you can knock on more than one and even with UDP or TCP packets. The goal here is, as we said, to slow them down and maybe discourage them from going deeper. Remember you still have your very secure RSA key access in the end.

Having the SSH port closed will also prevent overloading your logs...


Simple Port Knocking setup

Near the end of this article: " http://shorewall.org/Events.html " you will find in Examples a simple Port Knocking setup that works quite well.

Going back to our previous case, SSH port 22, or 65022 for that matter, will normally be kept closed until you send a proper sequence of port knocks. The port 22 or 65022 then will stay open for only 60 seconds. If you want to open another session and missed that 60 seconds time window, you will have to knock again.

Here is that example directly copied from http://shorewall.org/Events.html:

This example shows a different implementation of the one shown in the Port Knocking article.

In this example:
 
1- Attempting to connect to port 1600 enables SSH access. Access is enabled for 60 seconds.

2- Attempting to connect to port 1601 disables SSH access (note that in the article linked above, attempting to connect to port 1599 also disables access. This is an port scan defence as explained in the article).


To implement that approach create or add in:

1- /etc/shorewall/actions

#ACTION               OPTION                   DESCRIPTION
Knock                                          #Port Knocking

2- /etc/shorewall/action.Knock

#
# Shorewall version 4 - Port-Knocking Action
#
?format 2
###############################################################################
#ACTION               SOURCE         DEST      PROTO      DPORT
IfEvent(SSH,ACCEPT:info,60,1,src,reset)\
                     -              -         tcp        22
SetEvent(SSH,ACCEPT)  -              -         tcp        1600
ResetEvent(SSH,DROP:info)        

3- etc/shorewall/rules

#ACTION               SOURCE         DEST      PROTO      DPORT
Knock                 net            $FW       tcp        22,1599-1601          


If you were to login in your router using this last example you would have to type on your client machine:

ssh -p 1600 root@your.ipaddrs.router   # knock on port 1600... opens port 22 for 60 seconds
ssh root@your.ipaddrs.router           # to connect...


Multiple Ports Knocking setup

If you look again in http://shorewall.org/Events.html at example: " Stateful Port Knocking (knock with a sequence of ports) ", in the PERL module, you will find examples of 8 ports knocks... there is no limit...

If you want to try that last example, you will have to copy the PERL module KnockEnhanced.pm in /usr/lib/perl5/5.24.0 . Easiest way to do that is:

cd /usr/lib/perl5/5.24.0
wget http://shorewall.org/pub/shorewall/contrib/PortKnocking/KnockEnhanced.pm

and add this rule as the last line of /etc/shorewall/rules:

PERL use KnockEnhanced; KnockEnhanced 'net', '$FW', {name => 'SSH1', log_level => 3, proto => 'tcp', target => 'ssh', knocker => [52245,15623,19845]};


On your client computer, copy this script as knock.sh:

#!/bin/bash
HOST=$1
shift
for ARG in "$@"
do
       nmap -Pn --host-timeout 100 --max-retries 0 -p $ARG $HOST
done

then from your client computer do:

sh knock.sh your.ipaddrs.router 52245 15623 19845  # knock ports, opens 22 for 60 sec.
ssh root@your.ipaddrs.router                       # to connect...


So, whatever you do, herrrr... don't forget to save Doctor Freeman !!!

lrcfg -> s)

Prev Up Next