Difference between revisions of "Bering-uClibc 6.x - User Guide - Advanced Topics - Raspberry PI Zero W direct WIFI logon"

From bering-uClibc
Jump to: navigation, search
(Raspberry PI Zero W direct WIFI logon)
(Raspberry PI Zero W direct WIFI logon)
 
(2 intermediate revisions by the same user not shown)
Line 1: Line 1:
===Raspberry PI Zero W direct WIFI logon===
 
  
 
 
If you own a '''Raspberry PI Zero W''' you can connect to it using the WIFI interface only, no need for the console access using GPIOs serial pins 14 and 15 with a TTL-serial-USB adapter. This is an interesting feature if you want to use the lowest priced Zero which does not have a soldered GPIO pins header and want to keep it that way.
 
 
You can obtain a bootable image file https://sourceforge.net/projects/leaf/files/Bering-uClibc/7.0.1/Bering-uClibc_PiZ.img/download from the LEAF distribution and transfer it to an SD card using '''dd''' or the Raspberry PI Imager program on Windows or Mac.
 
 
Once the SD card is generated and is still inserted in your PC, open it up and add a new file '''wpa_supplicant.conf''' to it's existing content.
 
 
Fill this new file with:
 
 
# Minimal /etc/wpa_supplicant.conf to associate with open
 
#  access points.
 
 
# path to UNIX socket control interface
 
ctrl_interface=/var/run/wpa_supplicant
 
 
eapol_version=1
 
ap_scan=1
 
fast_reauth=1
 
 
### Example of basic WPA-PSK secured AP, uncomment the next 4 lines, add in your own ssid and psk...
 
#network={
 
#    ssid="yournet"
 
#    psk="yourpassword"
 
#}
 
 
### Associate with any open access point
 
###  Scans/ESSID changes can be done with wpa_cli
 
network={
 
        key_mgmt=NONE
 
}
 
 
 
On bootup the /init.d/wpasupplicant startup script will look for this file presence on the boot media, and will copy it's content to /etc/wpasupplicant.conf . The script will then delete the file on the boot media.
 
 
Wait a few minutes for the PI to load and run, find the PI Zero IP address ( using fing on your phone...) and from a browser type in the URL http://pi.zero.ip.addr . If faced with a password login request, admin:admin should get you there.
 
 
You should make these changes permanent by running '''lrcfg''' with the '''s)''' option... remember the file on the media will be erased after the first boot. Before doing that though, if you don't want to leave "yourpassword" in plain sight you could use the result of the command "'''wpa_passphrase yournet yourpassword'''" which will give you a hash of "yourpassword" that you can copy to '''/etc/wpa_supplicant.conf''' .
 

Latest revision as of 20:55, 2 January 2021