Difference between revisions of "Bering-uClibc 5.x - User Guide - Advanced Topics - Setting Up Add blocking with dnsmasq"
From bering-uClibc
(→manual setup) |
(→Objectives) |
||
Line 1: | Line 1: | ||
==Objectives== | ==Objectives== | ||
− | There is a lot of info on the net about setting <code class="filename">dnsmasq</code> to block advertisements, trackings... etc. This is a quick guide that shows a simple setup to filter add sites with dnsmasq | + | There is a lot of info on the net about setting <code class="filename">dnsmasq</code> to block advertisements, trackings... etc. This is a quick guide that shows a simple setup to filter add sites with dnsmasq and gets you started with a lot of avenues ! |
==Prerequisites== | ==Prerequisites== |
Revision as of 06:01, 14 November 2016
Objectives
There is a lot of info on the net about setting dnsmasq
to block advertisements, trackings... etc. This is a quick guide that shows a simple setup to filter add sites with dnsmasq and gets you started with a lot of avenues !
Prerequisites
- You will need Bering-uClibc 5.x or higher.
- The
curl.lrp
package.
manual setup
Enter the command:
curl -s -d mimetype=plaintext http://pgl.yoyo.org/as/serverlist.php?hostformat=dnsmasqserver > /root/tmpfile.list
Check your file tmpfile.list
, you should have a list of server with the following format:
server=/yieldlab.net/ server=/yieldmanager.com/ server=/yieldmanager.net/ server=/... etc /
Then:
cp /root/tmpfile.list /etc/dnsmasq.d/addblock.list
Edit /etc/dnsmasq.conf
and enter:
conf-dir=/etc/dnsmasq.d
Restart dnsmasq
with:
/etc/init.d/dnsmasq restart
That's it, all the nasty adds should be gone ! (well a bunch of them !)