Bering-uClibc 4.x - User Guide - Basic Configuration - Booting for the First Time
From bering-uClibc
| Basic Configuration - Booting for the First Time | ||
|---|---|---|
| Bering-uClibc 4.x - User Guide | Next | |
Install Media and Boot
Insert the prepared boot media into the system which is to run Bering-uClibc 4.x and power it on.
Successful First Boot
If everything works properly you should see lots of diagnostic output followed by a login prompt similar to the following:
LEAF Bering-uClibc 4.0.0 Rev 9 uClibc 0.9.30.3 firewall tty1 firewall login:
Login as user "root" (no password required at this point). You will be prompted to set a password for the root account (twice). You will then be presented with the LEAF configuration menu:
LEAF configuration menu
1) Network configuration
2) System configuration
3) Packages configuration
s) Save configuration
m) Backup modules
f) Find & load modules for hardware
c) Show configuration changes since last save
d) Show configuration changes from defaults
h) Help
q) quit
----------------------------------------------------------------------------
Selection:
Troubleshooting
TODO Add a summary of the likely error conditions and solutions.
| Up | Next |
