Difference between revisions of "Bering-uClibc 4.x - User Guide - Appendices - Hardware-Specific Guides"
Davidmbrooke (Talk | contribs) (Added note on ALIX NIC and driver) |
Davidmbrooke (Talk | contribs) (Expanded PC Engines ALIX section (now that I have one myself)) |
||
Line 20: | Line 20: | ||
==[http://www.pcengines.ch/alix.htm PC Engines ALIX]== | ==[http://www.pcengines.ch/alix.htm PC Engines ALIX]== | ||
− | + | ===Overview=== | |
+ | The ALIX family of small, energy efficient, single-board-computers from manufacturer [http://www.pcengines.ch/ PC Engines] are available in several variants within four "series", all of which use the AMD Geode CPU (either LX700 or LX800) and have an on-board Compact Flash (CF) card socket for storage: | ||
+ | ; ALIX1 : A miniITX board with 1 LAN connector and a VGA display output | ||
+ | ; ALIX2 : A 6"x6" board with 2 or 3 LAN connectors, no VGA, an RS-232 console connector and optional USB connectors | ||
+ | ; ALIX3 : A 100x160mm board with 1 LAN connector and an optional VGA display output | ||
+ | ; ALIX6 : A 6"x6" board with 2 LAN connectors, intended for mobile telephony integration | ||
+ | Of these, the ALIX2 series is generally preferred for LEAF usage, mainly because of the multiple LAN connectors. | ||
+ | In particular, the 2D3 and 2D13 variants are widely used for [[Bering-uClibc 4.x]] and perform well. | ||
− | The | + | The following probably only applies to boards in the ALIX2 series. |
− | Hardware / | + | ===Bering-uClibc 4.x Disk Image Selection=== |
+ | The ALIX2 boards have an RS-232 console connector and no VGA display output so the recommended [[Bering-uClibc 4.x]] disk Image is <code class="filename">Bering-uClibc_4.''VERSION''_geode_syslinux_ser.tar.gz</code> which is tailored for serial consoles. | ||
+ | |||
+ | ===Hardware / Driver Details=== | ||
* The network controller chip is a VIA Rhine™ III VT6105M Fast Ethernet Controller, and needs kernel Module <code class="filename">via-rhine.ko</code> | * The network controller chip is a VIA Rhine™ III VT6105M Fast Ethernet Controller, and needs kernel Module <code class="filename">via-rhine.ko</code> | ||
+ | * The AMD CS5536 "I/O Companion" chip implements the following functions: | ||
+ | ** IDE disk interface to the Compact Flash card, which needs kernel Module <code class="filename">pata-amd.ko</code> | ||
+ | ** RS-232 interface. Support for this is built into the [[Bering-uClibc 4.x]] kernel so no Module is required. | ||
+ | |||
+ | ===Installation Notes=== | ||
+ | ====Serial Console==== | ||
+ | As shipped, the serial console on the ALIX2 series boards is configured for 38400 baud, 8N1, no flow control. | ||
+ | Currently (Bering-uClibc 4.0-beta3) the <tt>_ser</tt> disk image is configured for 19200 baud. | ||
+ | Really these need to be aligned and need to match the setting of the terminal emulator being used. | ||
Revision as of 21:16, 18 March 2011
Appendices - Hardware-Specific Guides | ||
---|---|---|
Prev | Bering-uClibc 4.x - User Guide | Next |
Contents
PC Engines WRAP
TODO Need to copy content from http://leaf.sourceforge.net/doc/bucu-sc1100.html
The recommended Bering-uClibc 4.x disk Image is Bering-uClibc_4.VERSION_i486_syslinux_ser.tar.gz
Hardware / driver details:
- The IDE controller chip is a National Semiconductor SC1200, and needs kernel Module
pata_sc1200.ko
- The network controller chip is a National Semiconductor DP83816, and needs kernel Module
natsemi.ko
PC Engines ALIX
Overview
The ALIX family of small, energy efficient, single-board-computers from manufacturer PC Engines are available in several variants within four "series", all of which use the AMD Geode CPU (either LX700 or LX800) and have an on-board Compact Flash (CF) card socket for storage:
- ALIX1
- A miniITX board with 1 LAN connector and a VGA display output
- ALIX2
- A 6"x6" board with 2 or 3 LAN connectors, no VGA, an RS-232 console connector and optional USB connectors
- ALIX3
- A 100x160mm board with 1 LAN connector and an optional VGA display output
- ALIX6
- A 6"x6" board with 2 LAN connectors, intended for mobile telephony integration
Of these, the ALIX2 series is generally preferred for LEAF usage, mainly because of the multiple LAN connectors. In particular, the 2D3 and 2D13 variants are widely used for Bering-uClibc 4.x and perform well.
The following probably only applies to boards in the ALIX2 series.
Bering-uClibc 4.x Disk Image Selection
The ALIX2 boards have an RS-232 console connector and no VGA display output so the recommended Bering-uClibc 4.x disk Image is Bering-uClibc_4.VERSION_geode_syslinux_ser.tar.gz
which is tailored for serial consoles.
Hardware / Driver Details
- The network controller chip is a VIA Rhine™ III VT6105M Fast Ethernet Controller, and needs kernel Module
via-rhine.ko
- The AMD CS5536 "I/O Companion" chip implements the following functions:
- IDE disk interface to the Compact Flash card, which needs kernel Module
pata-amd.ko
- RS-232 interface. Support for this is built into the Bering-uClibc 4.x kernel so no Module is required.
- IDE disk interface to the Compact Flash card, which needs kernel Module
Installation Notes
Serial Console
As shipped, the serial console on the ALIX2 series boards is configured for 38400 baud, 8N1, no flow control. Currently (Bering-uClibc 4.0-beta3) the _ser disk image is configured for 19200 baud. Really these need to be aligned and need to match the setting of the terminal emulator being used.
Soekris Engineering net4501
TODO - Volunteers?
Currently reported as NOT WORKING with Bering-uClibc 4.0-beta2. Davidmbrooke 16:46, 5 February 2011 (UTC)
Soekris Engineering net4801
TODO - Volunteers?
The recommended Bering-uClibc 4.x disk Image is Bering-uClibc_4.VERSION_i486_syslinux_ser.tar.gz
Prev | Up | Next |