Difference between revisions of "Bering-uClibc 4.x - User Guide"

Revision as of 17:14, 8 January 2011

This is the "Table of Contents" page for the Bering-uClibc 4.x - User Guide.

This guide provides information for Installers, Administrators and general Users of Bering-uClibc 4.x. Earlier versions of Bering-uClibc had a separate Installation Guide and User's Guide but those documents have been combined together for Bering-uClibc 4.x. (There is still a separate Developer Guide though.)

Click on one of the links below to access the relevant Chapter or Sub-Chapter. Then, use the Next and Prev links to move from Chapter to Chapter, or click a Bering-uClibc 4.x - User Guide link (at the top of each Chapter or Sub-Chapter page) to return here.

Chapters

1. Introduction
2. Hardware Requirements
3. Installing the Disk Image
4. Basic Configuration
   • Booting for the First Time
   • Basic System Configuration
   • LEAF Packages
   • Log Files
   • Setup a small timeserver
   • Using Dropbear - a small SSH replacement
5. IPv4 Networking
   • External Network Connections
   • Internal Network Connections
   • Configure Shorewall
   • Configure Dnsmasq
6. IPv6 Networking
   • External Network Connections
   • Internal Network Connections
   • Configure Shorewall6
   • Configure Radvd
   • Configure DHCPv6
7. Advanced Topics
   • Setting Up a Client for Dynamic DNS
   • Setting Up a Wireless Access Point
   • Setting Up a Virtual Private Network (VPN)
   • Setting Up a Routing Daemon
   • Setting Up a VOIP Server
   • Setting Up a File Server
   • Setting Up Zeroconf Networking
   • Setting Up Universal Plug and Play (UPnP)
   • Setting Up Remote Monitoring

Appendices

1. Upgrading from Bering-uClibc 3.x
2. Overview of the Startup Sequence
3. Hardware-Specific Guides
4. Working with Disk Image Files