Bering-uClibc 4.x - Known Issues

From bering-uClibc
Revision as of 10:26, 26 December 2010 by Davidmbrooke (Talk | contribs) (Added note about WRAP hardware incompatibility with Beta1)

Jump to: navigation, search

Currently there is no ISDN support.

The developers has no testbed for ISDN. If you do need ISDN support, please drop us a note on mailto:leaf-user@lists.sourceforge.net, so we may get in contact with you and providing packages for testing.

lwp's for webconf are not included in the images.

This will be fixed in further releases.

Boot-time "hang" at "Starting BusyBox ntpd".

With some system configurations the boot process can appear to "hang" at the message "Starting BusyBox ntpd". This is due to ntpd not being able to resolve an IP address for its default NTP server. After some delay this will time-out (with the message ntpd: bad address '0.pool.ntp.org') after which the boot process will continue.

The problem is that the dnsmasq package is part of the default "LRP" package list in leaf.cfg, and so is dhcpcd but the two are not connected together in their default configuration. The solution is to configure dnsmasq to use the right "resolv-file" setting, as described here or to configure alternative packages as appropriate.

PC Engines WRAP disk controller not supported in 4.0 Beta1

The National Semiconductor SC1200 IDE controller requires the pata_sc1200 kernel Module which is not included in initrd.lrp (or modules.tgz) for Beta1. This will be fixed for Beta2.