Bering-uClibc 7.x
Contents
WARNING: Work in progress, the doc. is not complete
Overview
Bering-uClibc is one of the branches of the LEAF (Linux Embedded Appliance Framework) project, delivering on LEAF's ambition to provide a secure, feature-rich, customizable embedded Linux network appliance for use in a variety of network topologies. Although it can be used in other ways, its primary goal is as a Internet gateway, BRAS, router, firewall and wireless access point. The hardware running LEAF in these cases will require a minimum of 2 network interfaces.
Main Features
The key characteristics of Bering-uClibc 7.x are:
- Based on a recent long-term release of the Linux Kernel.
- Easy-to-use
- USB bootable images of a basic working firewall system
- Web browser access for quick and easier configuration, the traditional vga or serial display console is not required
- Hardware detection during boot, necessary modules enabling the hardware will be loaded automatically.
- Load modules when needed for various Packages - e.g. netfilter modules for
shorewall[6]. - Check for and receive updates with command line utility (
upgrade) or Web GUI (webconf) from the Packages repository.
- Targeted to run on industry standard devices even with non-x86 processors.
Bering-uClibc 5.0-prealpha running on an emulated ARM processor - Designed to perform well on relatively low-specification hardware. In particular:
- The system runs from an in-memory filesystem. Disk storage is only required for booting and for storing configuration settings.
- The uClibc-ng C library is used in place of the GNU C Library since uClibc-ng is much smaller in size.
- Considerable use is made of BusyBox utilities as replacements for larger applications.
- Focussed on providing excellent networking facilities.
- Designed to have high fault tolerance:
- There are no writes on HDD/flash during work (except saving configurations during maintenance) - so a power failure will not break file system.
- Corrupted/erased config file, or even 'rm -rf /' isn't a problem - changes are stored permanently only when user requires that, and reboot will restore all as it was before.
- Enabled by default watchdog, reboot on kernel panic and kernel soft-lockup detection will help to have minimum downtime of router.
- Backup scripts will help to restore system state on storage failure/operator mistake.
Development History
Bering-uClibc 7.x is basically Bering-uClibc 6.x brought up to date with the latest versions of the main software components and with reworked toolchain.
Bering-uClibc 7.0.0 provides in particular:
- gcc update to 8.3.0
- The Linux kernel has been upgraded to 5,4.x
- The uClibc library has been upgraded to uClibc-ng 1.0.35
- syslog-ng has been replaced by rsyslog
Bering-uClibc 7.1.0 provides in particular:
- gcc update to 9.3.0
- The Linux kernel has been upgraded to 5,10.x
- The uClibc library has been upgraded to uClibc-ng 1.0.37
Version 7.0.0 was released in November 2020.
Version 7.0.1 was released in December 2020.
Version 7.0.2 was released in February 2021.
Version Changelog
Known Issues
Further Documentation
For further information see:
- Bering-uClibc 7.x - Developer Guide for Developers of new features or new application Packages.
