Bering-uClibc 6.0.x - Changelog
From bering-uClibc
Revision as of 15:58, 1 June 2017 by Kapeka (Talk | contribs) (→Changes between 6.0.4 and 6.0.4-rc1)
Changelog | ||
---|---|---|
Bering-uClibc 6.x - Overview |
Contents
- 1 Changes between 6.0.4 and 6.0.4-rc1
- 2 Changes between 6.0.4-rc1 and 6.0.3
- 3 Changes between 6.0.3 and 6.0.3-rc1
- 4 Changes between 6.0.3-rc1 and 6.0.2
- 5 Changes between 6.0.2 and 6.0.2-rc1
- 6 Changes between 6.0.2-rc1 and 6.0.1
- 7 Changes between 6.0.1 and 6.0.1-rc1
- 8 Changes between 6.0.1-rc1 and 6.0.0
- 9 Changes between 6.0.0 and 6.0.0-rc1
- 10 Changes between 6.0.0-rc1 and 6.0.0-beta1
- 11 Changes between 6.0.0-beta1 and 6.0.0-alpha2
- 12 Changes between 6.0.0-alpha2 and 6.0.0-alpha1
- 13 Changes between 6.0.0-alpha1 and 5.2.x
Changes between 6.0.4 and 6.0.4-rc1
(unreleased)
- wireless-regdb
- updated to 2017.03.07
- aiccu
- REMOVE package
- While it ran flawlessly for more than ten years, sixxs.org will be closed on 2017-06-06 and there is no need to provide this package any longer.
- See: https://www.sixxs.net/sunset/
- We respect this decision and we owe them a lot for the outstanding work and help to move towards ipv6 networking!
Changes between 6.0.4-rc1 and 6.0.3
(released 20 May 2017)
- toolchain/uClibc-ng
- add patch to avoid ntp segfaulting with multicore kernel and i686 image (reported and tested by Robert K Coffman)
- kernel
- updated to version 4.4.68
- config/upgrade
- changed size parameter in the tmp size warning of upgrade to reflect size in MB instead of bytes to correspond to the warning message
- previous version of upgrade was badly broken with the introduction of the check_wget_dependencies function.
- use google.com as https test target
- do not abort patch_package if a file could not be found for patching
- copy module.sqfs in any case
- removed obsolete compact_modules function and more cleanup
- curl
- updated to upstream version 7.54.0
- dropbear
- updated to upstream version 2017.75
- openvpn
- updated to upstream version 2.3.16
- pmacctd
- updated to upstream version 1.6.2
Changes between 6.0.3 and 6.0.3-rc1
(released 17 Apr 2017)
- kernel
- updated to version 4.4.61
- add patch to fix crash in TCPMSS module
- bmon
- fix buildtool.mk to link with $(BT_STAGING_DIR) instead of i486 staging dir
- upgrade
- fixed file selection code in patch_package
- Added check for either openssl or wget ssl
- Enabled post-upgrade
- libpng
- updated to upstream version 1.6.29
- ntp
- updated to upstream version 4.2.8p10
- ppp-shaper
- increase policier burst size
Changes between 6.0.3-rc1 and 6.0.2
(released 19 Mar 2017)
- kernel
- updated to version 4.4.54
- bind
- updated to upstream version 9.11.0-P3
- curl
- updated to upstream version 7.53.1
- use /etc/ssl/certs as default ca-path
- dbus
- updated to upstream version 1.10.16
- ixgbe
- Add base driver for 10 Gigabit Intel® Network Connections
- libgcrypt
- updated to upstream version 1.7.6
- libssh2
- updated to upstream version 1.8.0
- nano
- updated to upstream version 2.7.5
- nsd
- updated to upstream version 4.1.15
- pciutils
- updated to upstream version 3.5.4
- updated pci.ids and replaced gz tarball with slightly smaller bz2 tarball
- pmacctd
- updated to upstream version 1.6.1
- Note: I haven't included additional available plugins until requested and someones willing to test and document.
- strace
- updated to upstream version 4.16
- tcpdump
- updated to upstream version 4.9.0
- vnstat
- updated to upstream version 1.17
Changes between 6.0.2 and 6.0.2-rc1
(released 30 Jan 2017)
- kernel
- updated to upstream version 4.4.45
- bind
- updated to upstream version 9.11.0-P2
- ip[6]tables
- fix loading modules from modules.sqfs for ip[6]tables-restore; patch provided by John Sager
- iperf3
- updated to upstream version 3.1.5
- lighttpd
- updated to upstream version 1.4.45
- openssl
- updated to upstream version 1.0.2k
- squid
- updated to upstream version 3.5.24
- vnstat
- updated to upstream version 1.16
Changes between 6.0.2-rc1 and 6.0.1
(released 11 Jan 2017)
- kernel
- updated to upstream version 4.4.41
- dropbear
- fix options.h
- resolves error "Couldn't agree a key exchange algorithm"
- etc
- add /usr/sbin and /sbin to /etc/profile path declaration
- iperf3
- updated to upstream version 3.1.4
- libcurl
- updated to upstream version 7.52.1
- libdnet
- fix packaging
- libmnl
- fix packaging
- libpng
- updated to upstream version 1.6.28
- libusb
- updated to upstream version 1.0.21
- lighttpd
- updated to upstream version 1.4.44
- nano
- updated to upstream version 2.7.4
- nsd
- updated to upstream version 4.1.14
- ntp
- updated to upstream version 4.2.8p9
- oprofile
- fix packaging
- shorewall
- add fix for init to load modules also when calling "restart"
- squid
- updated to upstream version 3.5.23
- strace
- updated to upstream version 4.15
- strongswan
- fix packaging; libhydra has been removed in upstream, so do not try to package it
Changes between 6.0.1 and 6.0.1-rc1
(released 18 Dec 2016)
- kernel
- updated to upstream version 4.4.39
- config
- added post_upgrade functions to upgrade script
- dbus
- updated to upstream version 1.10.14
- libpng
- updated to upstream version 1.6.26
- modules
- add ipv6 loaded as default
- nano
- updated to upstream version 2.7.2
Changes between 6.0.1-rc1 and 6.0.0
(released 5 Dec 2016)
- kernel
- updated to upstream version 4.4.36
- wireless-regdb updated to 2016.06.10
- bind
- updated to upstream version 9.11.0
- hdparm
- updated to upstream version 9.50
- iw
- updated to upstream version 4.9
- libpam
- updated to upstream version 1.30
- libpcap
- updated to upstream version 1.8.1
- lighttpd
- updated to upstream version 1.4.42, also added all modules and configuration files
- openvpn
- updated to upstream version 2.3.12
- shorewall[6]
- updated to upstream version 5.0.13.4
- strongswan
- updated to upstream version 5.5.1
- tcpdump
- updated to upstream version 4.8.1
- unbound
- updated to upstream version 1.5.10
- wpasupplicant
- updated to upstream version 2.6
- xtables-addons
- updated to upstream version 2.11
Changes between 6.0.0 and 6.0.0-rc1
(released 22 Oct 2016)
- kernel
- updated to upstream version 4.4.26
- updated patches for Raspberry Pi kernel
- busybox
- updated to upstream version 1.25.1
- dbus
- updated to upstream version 1.10.12
- dhcpcd
- updated to upstream version 6.11.5
- hostapd
- updated to upstream version 2.6
- shorewall[6]
- updated to upstream version 5.0.12.1
- squid
- updated to upstream version 3.5.22
Changes between 6.0.0-rc1 and 6.0.0-beta1
(released 9 Oct 2016)
- kernel
- updated to upstream version 4.4.24
- dbus
- updated to upstream version 1.10.10
- dhcpcd
- updated to upstream version 6.11.3
- e1000e
- updated to 3.3.5
- e2fsprogs
- updated to upstream version 1.43.3
- e3
- updated to upstream version 2.81
- fwlogwatch
- updated to upstream version 1.5
- igb
- updated to 5.3.5.3
- libcurl
- updated to upstream version 7.50.3
- libpng
- updated to upstream version 1.6.25
- nano
- updated to upstream version 2.7.0
- nettle
- updated to upstream version 3.3
- pciutils
- updated to upstream version 3.5.2
- squid
- updated to upstream version 3.5.21
- strace
- updated to upstream version 4.14
- tor
- updated to upstrem version 0.2.8.8
- usbmodeswitch
- updated to upstream version 2.4.0
- usbmodeswitchdata
- updated to upstream version 20160803
- util-linux
- updated to upstream version 2.28.2
- zabbix
- updated to upstream version 2.4.8
Changes between 6.0.0-beta1 and 6.0.0-alpha2
(released 4 Sept 2016)
- general
- add kernel 4.4.x support for Raspberry Pi Rev1 boards and booting via device tree (incl. overlays)
- toolchain
- uClibc-ng updated to upstream version 1.0.17
- kernel
- updated to upstream version 4.4.19
- bird
- updated to upstream version 1.6.0
- config
- removed redundant call to mount_storage
- conntrack-tools
- updated to upstream version 1.4.4
- libgpg-error
- updated to upstream version 1.24
- libmnl
- updated to upstream version 1.0.4
- libnetfilter_conntrack
- updated to upstream version 1.0.6
- lighttpd
- updated to upstream version 1.4.41
- monit
- upgraded to upstream version 5.18
- nano
- updated to upstream version 2.6.2
- perf
- compilation fix
- perl
- updated to upstream version 5.24.0
- pmacctd
- updated to upstream version 1.6.0
- shorewall[6]
- updated to upstream version 5.0.11
- snort
- updated to upstream version 2.9.8.3
- syslog
- remove /var/log/messages; contents are in other log files as well, so it just wastes RAM
- tor
- updated to upstream version 0.2.8.7
Changes between 6.0.0-alpha2 and 6.0.0-alpha1
(released 16 Jul 2016)
- kernel
- updated to upstream version 4.4.15
- backport APU2 watchdog fix. (This enables hardware watchdog for PCEngines APU2 devices. Load in /etc/modules like "sp5100_tco timeout=60" to reboot after 60 sec if watchdog is doesn't work any longer.)
- toolchain
- uclibc-ng updated to upstream version 1.0.16
- bash
- updated to 4.3.30p46
- busybox
- updated to upstream version 1.25.0
- add busybox-ntpd.patch to avoid busybox ntp to daemonize before dns resolution
- devtools
- strace updated to upstream version 4.12
- dnsmasq
- updated to upstream version 2.76
- expat
- updated to upstream version 2.2.0
- dibbler-client
- new package for dibbler client
- gettext
- updated to upstream version 0.19.8.1
- iw
- updated to upstream version 4.7
- knockd
- update to latest master (0.7.8)
- libconfuse
- updated to upstream version 3.0
- libdnet
- updated to upstream version 1.12
- libgmp
- updated to upstream version 6.1.1
- nano
- updated to upstream version 2.6.0
- ser2net
- updated to upstream version 2.10.1
- replace the repositories ser2net config file with the one from the sources
- shorewall[6]
- updated to upstream version 5.0.9.2
Changes between 6.0.0-alpha1 and 5.2.x
(released 23 May 2016)
- general
- removed initmod.lrp and build all previously needed modules to boot into the kernel
- load modules automatically from modules.sqfs with hwdetect, from /etc/modules or during start of an app from init (e.g. shorewall)
- save firmware via local.lrp
- toolchain
- gcc updated to 5.3.0
- uClibc updated to uClibc-ng 1.0.14
- kernel
- updated to version 4.4.11
- add WRAP optimized kernel
- bash
- updated to 4.3.30p42
- busybox
- updated to upstream version 1.24.2
- clamav
- updated to upstream version 0.99.1
- dhcpcd
- updated to upstream version 6.10.1
- libpam
- new package Linux-PAM (Pluggable Authentication Modules for Linux), version 1.2.1
- nano
- updated to new upstream version 2.5.3
- openvpn
- support libpam authentication plugin; requires libpam
- merge openvpn-lzo package with openvpn
- perl
- updated to new upstream version 5.22.1
- rsync
- updated to upstream version 3.1.2
- shorewall[6]
- updated to upstream version 5.0.7.2
- usbmodeswitch
- updated to upstream version 2.3.0
- usbmodeswitchdata
- updated to upstream version 20160112
- util-linux
- renamed from util-linux-ng and updated to new upstream version 2.28
Up |