Difference between revisions of "Bering-uClibc 5.x - User Guide - Advanced Topics - Setting Up Add blocking with dnsmasq"
From bering-uClibc
(→Prerequisites) |
(→manual setup) |
||
Line 12: | Line 12: | ||
Enter the command: | Enter the command: | ||
− | curl -s -d mimetype=plaintext http://pgl.yoyo.org/as/serverlist.php?hostformat=dnsmasqserver > /root/tmpfile.list | + | curl -s -d mimetype=plaintext http://pgl.yoyo.org/as/serverlist.php?hostformat=dnsmasqserver > /root/tmpfile.list |
+ | |||
+ | Check your file <code class ="filename">tmpfile.list</code>, you should have a list of server with the following format: | ||
+ | server=/yieldlab.net/ | ||
+ | server=/yieldmanager.com/ | ||
+ | server=/yieldmanager.net/ | ||
+ | server=/... etc / | ||
+ | |||
+ | Then: | ||
+ | |||
+ | cp /root/tmpfile.list /etc/dnsmasq.d/addblock.list | ||
+ | |||
+ | Edit <code class ="filename">/etc/dnsmasq.conf</code> and enter: | ||
+ | |||
+ | conf-dir=/etc/dnsmasq.d | ||
+ | |||
+ | Restart <code class ="filename">dnsmasq</code> with: | ||
+ | |||
+ | /etc/init.d/dnsmasq restart | ||
+ | |||
+ | That's it, all the nasty adds should be gone ! |
Revision as of 05:55, 14 November 2016
Objectives
There is a lot of info on the net about setting dnsmasq
to block advertisements, trackings... etc. This is a quick guide that shows a simple setup to filter add sites with dnsmasq.
Prerequisites
- You will need Bering-uClibc 5.x or higher.
- The
curl.lrp
package.
manual setup
Enter the command:
curl -s -d mimetype=plaintext http://pgl.yoyo.org/as/serverlist.php?hostformat=dnsmasqserver > /root/tmpfile.list
Check your file tmpfile.list
, you should have a list of server with the following format:
server=/yieldlab.net/ server=/yieldmanager.com/ server=/yieldmanager.net/ server=/... etc /
Then:
cp /root/tmpfile.list /etc/dnsmasq.d/addblock.list
Edit /etc/dnsmasq.conf
and enter:
conf-dir=/etc/dnsmasq.d
Restart dnsmasq
with:
/etc/init.d/dnsmasq restart
That's it, all the nasty adds should be gone !